PHASE DYNAMICS, INC

Phase Dynamics, Inc. APPLICATION DATA SHEET

1. DATE REQUESTED: ________________________

Representative_______________________________

2. CUSTOMER CONTACT_____________________

Address: ___________________________________

__________________________________________

__________________________________________

DATE REQUIRED:______________________________

PHONE:______________________________________

PHONE:(_____)________________________________

FAX:(_____)___________________________________

3. Field Conditions and Connections:

Critical Process Information	Units of measure	Min		Normal		Max		Measured Range
Temperature
Pressure
Flow Rate
Oil Density
Flange Rating	ANSI 150		ANSI 300		ANSI 600		ANSI 900
Flange Type	RF		RTJ		Flat Face
Pipe Configuration	U		Z

MANDATORY INFORMATION NEEDED FOR FULL & HIGH RANGE

Critical Process Information	Units of measure	Min		Normal		Max		Measured Range
Salinity
Specify Water Cut Range
Pipe Size			2 inch		3 inch		4 inch

MANDATORY INFORMATION NEEDED FOR LOW & MID RANGE

Critical Process Information	Units of measure	Min		Normal		Max		Measured Range
Specify Water Cut Range
Specify Largest % of known water
Pipe Size	1 inch		2 inch		3 inch		4 inch

Describe Product Type: (crude, NGL, condensate, kerosene, etc.)_________________________________________________

ELECTRONIC AREA & POWER Requirements:

Area Classifications

Class 1 Div. 1

General Purpose

Power Requirements

120 VAC 60 Hz

230 VAC 50 Hz

24 VDC

120 VAC 50 Hz

Cable Length

20 feet

50 feet

100 feet

150 feet

Special Length

_________

feet

Communication
Options

4-20 mA stream select Input

RS-422 MultiDrop Software

Brief Application Description:

(i.e. Test Separator, Truck pit, well production)______________________________________

Notes

:___________________________________________________________________________________________________