|
Parts Per Million Water Analyzer
- 10 ppm to 5,000 ppm Water
- 3/8" Flow-Through Tubing Connections
- High Pressure - to 3,000 psi
- On-Line Measurement
- Recovers from 100% Water Without Damage to Sensor
- Responds Quickly to Increasing Water Content
- Certifications Available
- CSA, FM, CE, EEX
- Temperature Probe Included
- Self Calibrating Current Loop
- New Generation Sensor and Electronics
- Oil Field Proven Rugged Design
- ModBus RTU & 4-20 mA
- 24 VDC Power
- Operator Interface System Available
Typically used for measurement in liquid propane, propylene and other pipelined products to determine when incoming product exceeds required moisture levels. Can also be used in a gas pipeline to determine water content. Flexibility for the user is provided through the use of stainless steel tubing to connect anywhere in the process where a minor pressure drop can be obtained.
Phase Dynamics' Analyzers offer the most reliable, maintenance free measurement possible. Phase Dynamics utilizes the patented, "Oscillator Load Pull" microwave technology which provides the reproducibility and accuracy required for those applications. This technology coupled with the Company's patented use of
aluminum oxide beads provides the process measurement to ppm levels.
All functions of the analyzers are accessed through use of an optional Operator Interface System (OIS). No external electronics is required after initial setup with the OIS. Output is MODBUS-RTU or a simple 4-20 mA current loop. Full digital access to the information is standard. Measurement Section Electronics is explosion proof. Temperature averaging for pipeline batches is available.
| PARAMETER |
Range |
Comments |
| RANGE |
10 ppm to 5,000 ppm |
Response time is determined by Flow Rate |
| ACCURACY |
+/- 20 ppm |
|
| REPEATABILITY |
+/- 10ppm |
|
| RESOLUTION | 5 ppm | |
| FLUID TEMPERATURE |
60° - 160° F | |
| HIGH TEMP, VERSION |
60° - 220° F | |
| RESPONSE TIME (Minutes) | 10 minutes | To Achieve 80% of Final Value |
System Specifications
General
Power Requirements:
- 18-28 VDC
- 120 VAC with CIS (Optional)
- 25 Watts Typical, 50 Watts Maximum
Outputs
- Analog: 4-20ma, 12 bit D-to-A Conversion
- Digital: RS-485 Modbus RTU
Fluid Temperature Compensation
- Automatic with Built-in RTD Temperature Probe
- Temperature Averaging Optional
Ambient Temperature Ranges
- Measurement Section: -40° F to +120° F
- Electronics: +32° F to +120° F; Sun Shade Recommended
Fluid Temperatures
- Standard 60° to 160° F
- Optional 60° to 220° F
- Optional 100° to 400° F
- Optional 100° to 600° F
- Lower Temperatures Optional
Operator Interface System Electronics & Enclosures (Optional)
Standard Explosion Proof Enclosure
- 17.4 H x 14.0 W x 9.9 D inches; 59 lbs., NEMA 4, 7 & 9;
Class 1, Div. 1, Groups C&D; EEx d IIb T5 89°C - IP66 (Optional)
Rain and Dust Tight Fiberglass Enclosure
- 16.3 H x 10.5 W x 7.9 D inches; 17 lbs., NEMA 4
LCD Display
- Bit Mapped
- Alpha Numeric plus Graphics
Measurement Section
Pressure Ratings
- Flange Sizes up to ANSI 1,500; Swagelok Fittings
standard; Others Optional
Construction
- 316/316L Standard; Other Materials Available; Designed
and Fabricated per ASME B31.3 & ASME IX; Full Material Certifications Optional
Process Connections
Cable between Operator Interface System (OIS) and
Measurement Section
- Dedicated 4 Conductor 4,000 feet Maximum Length between
Electronics and Measurement Section
Certifications
- Class 1, Div. 1, Groups C&D; EEx d IIB T5 89°C - IP66
(Optional)
Optional Certifications
Measurement Section Physical Drawing
|
